I nostri numeri

• 879.412 dispositivi medici
• 12.856 produttori
• 6.771 categorie

Elenco dei dispositivi realizzati dal produttore SWEDEN & MARTINA SPA

• 1
• 2
• 3
• 5
• A
• B
• C
• D
• E
• F
• G
• H
• I
• K
• L
• M
• N
• O
• P
• R
• S
• T
• U
• V
• W
• X

• ABRASIVI
• ABRASIVI MARRONI PER CROMO COBALTO
• ABRASIVI MARRONI X CROMO COBALTO
• ABRASIVO IN DIAMANTE SINTETICOGRANA GROSSA AN.VERDE A LENTE
• ABRASIVO IN DIAMANTE SINTETICOGRANA GROSSA AN.VERDE A RUOTI
• ABUT. INT. XAD.3,00 H.4 MM
• ABUT. INT. XAD.3,00 H.5 MM
• ABUT. INT. XAD.3,00 H.6 MM
• ABUT. INT. XAD.3,30 H.4 MM
• ABUT. INT. XAD.3,30 H.5 MM
• ABUT. INT. XAD.3,30 H.6 MM
• ABUT. INT. XAD.4,25 H.4 MM
• ABUT. INT. XAD.4,25 H.5 MM
• ABUT. INT. XAD.4,25 H.6 MM
• ABUT. INT. XAD.5,00 H.4 MM
• ABUT. INT. XAD.5,00 H.5 MM
• ABUT. INT. XAD.5,00 H.6 MM
• ABUT. PAD ANGOLATO A 17 GR.H.3 MM, PER SLIM-DAT
• ABUT. PAD ANGOLATO A 17 GR.H.5 MM, PER CSR-DAT
• ABUT. PAD ANGOLATO A 17 GR.PER CSR-DAT
• ABUT. PAD ANGOLATO A 30 GR.H.3 MM, PER SLIM-DAT
• ABUT. PAD ANGOLATO A 30 GR.H.5 MM, PER CSR-DAT
• ABUT. PAD ANGOLATO A 30 GR.PER CSR-DAT
• ABUT. PAD DRITTO PER CSR-V
• ABUT. PAD DRITTO PER SLIM-DATH.1 MM
• ABUT. PAD DRITTO PER SLIM-DATH.2 MM
• ABUT. PAD DRITTO PER SLIM-DATH.3 MM
• ABUT. PAD DRITTO PER SLIM-DATH.4 MM
• ABUT. PLAIN PER CSR-DAT
• ABUT. PLAIN PER CSR-DATH.1 MM
• ABUT. PLAIN PER CSR-DATH.2 MM
• ABUT. PLAIN PER CSR-DATH.3 MM
• ABUT. PLAIN PER CSR-DATH.4 MM
• ABUT. PLAIN PER CSR-V
• ABUT. PLAIN PER CSR-VH.1 MM
• ABUT. PLAIN PER CSR-VH.2 MM
• ABUT. PLAIN PER CSR-VH.3 MM
• ABUT. PLAIN PER CSR-VH.4 MM
• ABUTMENT ACTIVE FOR DIRECTSCREWING, WITH HEXAGON
• ABUTMENT ACTIVE WIDE DIRECTSCREWING, WITH HEXAGON
• ABUTMENT CR-CO CAD-CAMCSR-DAT
• ABUTMENT CR-CO D.10 D.IMP.3,00-3,50/ATT.SW
• ABUTMENT CR-CO D.12 D.IMP.3,80-5,00/ATT.SW
• ABUTMENT D. 4.10 H.1 MM-
• ABUTMENT D.3,40 MM H. 1 MM
• ABUTMENT D.3,40 MM H. 2 MM
• ABUTMENT D.3,40 MM H. 4 MM
• ABUTMENT D.3,80 MM H. 1 MM
• ABUTMENT D.3,80 MM H. 2 MM
• ABUTMENT D.3,80 MM H. 4 MM
• ABUTMENT D.4,70 MM H. 1 MM
• ABUTMENT D.4,70 MM H. 2 MM
• ABUTMENT D.5,70 MM H. 1 MM
• ABUTMENT D.5,70 MM H. 2 MM
• ABUTMENT D.6,70 MM H. 1 MM
• ABUTMENT D.6,70 MM H. 2 MM
• ABUTMENT D.7,50 MM H. 1 MM
• ABUTMENT D.7,50 MM H. 2 MMABUTMENT H.4 MM, AZZURRA
• ABUTMENT FRESABILE TITANIOSLIM-DAT, BLANK D.10 MM
• ABUTMENT FRESABILE TITANIOSLIM-DAT, BLANK D.12 MM
• ABUTMENT FRESABILE TITANIOSLIM-DAT, BLANK D.8 MM
• ABUTMENT H.1 MMPREMIUM D.3.30
• ABUTMENT H.2 MMPREMIUM D.3.30
• ABUTMENT H.2 MMPREMIUM D.3.75
• ABUTMENT INTERMEDIO PRAMAEX.2,85 H 1.5 MM
• ABUTMENT P.A.D. ANGLE AT 17GR.D.4,10MM
• ABUTMENT P.A.D. ANGLE AT 17GR.PRE/KOH D.3,80 MM
• ABUTMENT P.A.D. ANGLE AT 17GRPRE/KOH D.4,25 MM
• ABUTMENT P.A.D. ANGLE AT 17°D.3,80 MM
• ABUTMENT P.A.D. ANGLE AT 17°D.4,30 MM
• ABUTMENT P.A.D. ANGLE AT 30GR.D.4,10MM
• ABUTMENT P.A.D. ANGLE AT 30GR.PRE/KOH D.3,80 MM
• ABUTMENT P.A.D. ANGLE AT 30GR.PRE/KOH D.4,25 MM
• ABUTMENT P.A.D. ANGLE AT 30°D.3,80 MM
• ABUTMENT P.A.D. ANGLE AT 30°D.4,30 MM
• ABUTMENT SCREW M1.6, DAT-N
• ABUTMENT SCREW M1.6, DAT-N (10 PCS)
• ABUTMENT STRAIGHT PROFILE D.3,80 H.1 MM
• ABUTMENT STRAIGHT PROFILE D.3,80 H.2 MM
• ABUTMENT STRAIGHT PROFILE D.3,80 H.4 MM
• ABUTMENT STRAIGHT PROFILE D.4,30 H.1 MM
• ABUTMENT STRAIGHT PROFILE D.4,30 H.2 MM
• ABUTMENT STRAIGHT PROFILE D.4,30 H.4 MM
• ABUTMENT STRAIGHT PROFILE D.4,80 H.1 MM
• ABUTMENT STRAIGHT PROFILE D.4,80 H.2 MM
• ABUTMENT STRAIGHT PROFILE D.4,80 H.4 MM
• ABUTMENT STRAIGHT PROFILE D.5,50 H.1 MM
• ABUTMENT STRAIGHT PROFILE D.5,50 H.2 MM
• ABUTMENT STRAIGHT PROFILE D.5,50 H.4 MM
• ABUTMENT TIT. D.10 D.IMP.3,00-3,50/ATT.SW
• ABUTMENT TIT. D.12 D.IMP.3,80-5,00/ATT.SW
• ABUTMENT TITANIO CAD-CAMCSR-DAT
• ABUTMENT TITANIO CAD-CAMSLIM-DAT
• ABUTMENT WIDE WITH OCTAGON-
• ABUTMENT WITH OCTAGON-
• ABUTMENT, D. 3.75, H. 1 MM5.00,
• ABUTMENT, D. 4.25, H. 2 MM5.00,
• ABUTMENT, D. 5.00, H. 1 MM5.00,
• ABUTMENT, D. 5.00, H. 4 MM5.00,
• ACTIVE ABUTMENT WITH OCTAGON -
• ACTIVE POST CONICAL FORMSTANDARD PLATFORM
• ACTIVE POST FOR FUSIONEXTERNAL CLOSURE SIDE IMPLANT
• ACTIVE PRE-ANGLED POST 15°H.6 MM
• ACTIVE PRE-ANGLED POST 20°H.6 MM
• ACTIVE ROTAT. POST FOR FUSIONEXTERNAL CLOSURE SIDE IMPLANT
• ACTIVE ROTAT. POST FOR FUSIONWIDE EXT.CLOSURE SIDE IMPLANT
• ACTIVE WIDE ABUTMENT WITHOCTAGON
• ACTIVE WIDE MILLABLE POSTEXTERNAL CLOSURE SIDE IMPLANT
• ACTIVE WIDE POST CONICAL FORMWIDE PLATFORM
• ADONIS
• AESTHETIC TEMPORARY POSTGLOBAL, NO REP.
• AESTHETIC TEMPORARY POSTGLOBAL, REPOSIZIONABLE
• AESTHETIC TRANSG. HEALINGCAP, D.4.25 MM EX.2.30
• AESTHETIC TRANSG. HEALINGCAP, D.5.00 MM EX.2.30
• AESTHETIC TRANSGINGIVALHEALING CAP, GLOBAL
• AGHI INTRAORALI METALLICI X VIRAGE20 GAUGE - CONF DA 48 PZ
• ALL STONE
• ANALOGUE CSR-DATINTRAORAL SCANBODY
• ANALOGUE FOR CSR-DAT IMPLANTD. 4,20 MM
• ANALOGUE FOR IMPLANT D.4.25 MM EX.2.30
• ANALOGUE FOR IMPLANT DAT
• ANALOGUE FOR IMPLANT DAT-N
• ANALOGUE FOR IMPLANT SYRAD. 3.80 MM
• ANALOGUE FOR IMPLANT SYRAD. 4.25 MM
• ANALOGUE FOR IMPLANT SYRAD. 5.00 MM
• ANALOGUE FOR IMPLANT SYRASHORT D. 4,10 MM
• ANALOGUE FOR IMPLANT SYRASHORT D. 5,00 MM
• ANALOGUE FOR PAD ABUTMENT
• ANALOGUE FOR PRAMA IMPLANT D. 4.25 MM
• ANALOGUE FOR PRAMA IMPLANT D. 5.00 MM
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF,D.3.80 H1 SHORT
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF,D.3.80 H2 SHORT
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF,D.3.80 H4 SHORT
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF.,D.3.30 H1 SHORT
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF.,D.3.30 H2 SHORT
• ANALOGUE FOR PRE-MADE POST, ANAT.PROF.,D.3.30 H4 SHORT
• ANALOGUE FOR PRE-MADE POST, STRAIGHT, D.3.80 SHORT
• ANALOGUE FOR PRE-MADE POST, STRAIGHT,D.3.30 SHORT
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.30 H1 MM
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.30 H2 MM
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.30 H4 MM
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.80 H1 MM
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.80 H2 MM
• ANALOGUE FOR PRE-MADE POST., ANAT.PROF.,D.3.80 H4 MM
• ANALOGUE FOR PRE-MADE POST., STRAIGHT.,D.3.30 MM
• ANALOGUE FOR PRE-MADE POST., STRAIGHT.,D.3.80 MM
• ANALOGUE FOR PRE-MADE XA POST D.5,00 MM
• ANALOGUE FOR PRE-MADEXA POST D.4.25 MM
• ANALOGUE FOR SHELTAIMPLANT D.4.25 MM
• ANALOGUE FOR SHELTAIMPLANT D.5.00 MM
• ANALOGUE FOR SHELTAIMPLANT D.6,00 MM
• ANALOGUE FOR SOLID ONE-PIECEABUTMENT, CSR-DAT D. 3.80 MM
• ANALOGUE FOR SOLID ONE-PIECEABUTMENT, CSR-DAT D. 4.20 MM
• ANALOGUE,SOLID ONE-PIECE ABUT. DAT
• ANALOGUE,SOLID ONE-PIECE ABUT. DAT-N
• ANELLI RIDUTTORI E PROLUNGHE
• ANTISPEE ARCO ORTOD. RETTANG. INFER. 016X022, CONF.10PZ.
• ANTISPEE ARCO ORTOD. RETTANG. INFER. 018X025, CONF.10PZ.
• ANTISPEE ARCO ORTOD. RETTANG. INFER. 021X025, CONF.10PZ.
• ANTISPEE ARCO ORTOD. RETTANG. SUPER. 016X022, CONF.10PZ.
• ANTISPEE ARCO ORTOD. RETTANG. SUPER. 018X025, CONF.10PZ.
• ANTISPEE ARCO ORTOD. RETTANG. SUPER. 021X025, CONF.10PZ.
• ANTISPEE ARCO ORTOD. TONDO INFER. 016, CONF.10 PZ.
• ANTISPEE ARCO ORTOD. TONDO INFER. 018, CONF.10 PZ.
• ANTISPEE ARCO ORTOD. TONDO SUPER. 016, CONF.10 PZ.
• ANTISPEE ARCO ORTOD. TONDO SUPER. 018, CONF.10 PZ.
• ANTISPEE TH ARCO ORT. RETTANG. INFER. 016X022, CONF.10PZ.
• ANTISPEE TH ARCO ORT. RETTANG. INFER. 018X025, CONF.10PZ.
• ANTISPEE TH ARCO ORT. RETTANG. INFER. 021X025, CONF.10PZ.
• ANTISPEE TH ARCO ORT. RETTANG. SUPER. 016X022, CONF.10PZ.
• ANTISPEE TH ARCO ORT. RETTANG. SUPER. 018X025, CONF.10PZ.
• ANTISPEE TH ARCO ORT. RETTANG. SUPER. 021X025, CONF.10PZ.
• ANTISPEE TH ARCO ORT. TONDO INFER. 016, CONF.10 PZ.
• ANTISPEE TH ARCO ORT. TONDO INFER. 018, CONF.10 PZ.
• ANTISPEE TH ARCO ORT. TONDO SUPER. 016, CONF.10 PZ.
• ANTISPEE TH ARCO ORT. TONDO SUPER. 018, CONF.10 PZ.
• AP+
• APRIBOCCA TRASPARENTE LARGE, 1 PZ.
• APRIBOCCA TRASPARENTE MEDIUM, 1 PZ.
• APRIBOCCA TRASPARENTE SMALL, 1 PZ.
• ARCHI PER ORTODONZIA
• ARCHI PER ORTODONZIA
• ARCO EXTRAORALE MIS.2, 90 MM. BIANCO, 1PZ
• ARCO EXTRAORALE MIS.3, 97 MM. BIANCO, 1PZ
• ARCO EXTRAORALE MIS.4, 104 MM. BIANCO, 1PZ
• ARCO EXTRAORALE MIS.5, 111 MM. BIANCO, 1PZ
• ARCO EXTRAORALE UNIVERSALE BIANCO, 1PZ
• ATTACCHI ORTODONTICI E TUBI BUCCALI ORTODONTICI
• ATTACCHI ORTODONTICI E TUBI BUCCALI ORTODONTICI
• ATTACCO SFERICO DRIT. D. PIATTAF. 3.4, H. 1
• ATTACCO SFERICO DRIT. D. PIATTAF. 3.8, H. 4
• ATTACCO SFERICO DRIT. D. PIATTAF. 4.7, H. 1
• ATTACCO SFERICO DRIT. D. PIATTAF. 4.7, H. 1, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 4.7, H. 2, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 4.7, H. 3
• ATTACCO SFERICO DRIT. D. PIATTAF. 4.7, H. 4
• ATTACCO SFERICO DRIT. D. PIATTAF. 5.7, H. 1
• ATTACCO SFERICO DRIT. D. PIATTAF. 5.7, H. 1, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 5.7, H. 2, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 5.7, H. 4, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 6.7, H. 1, CONNESSIONE COR
• ATTACCO SFERICO DRIT. D. PIATTAF. 6.7, H. 2, CONNESSIONE COR
• ATTACCO SFERICO PER SLIM-DATH.1 MM
• ATTACCO SFERICO PER SLIM-DATH.2 MM
• ATTACCO SFERICO PER SLIM-DATH.3 MM
• ATTACCO SFERICO PER SLIM-DATH.4 MM
• ATTACCO SFERICO PILOT D.3,40H.3 MM, CHIAVE ESAGONALE
• ATTACCO SFERICO PILOT D.3,80H.1 MM, CHIAVE ESAGONALE
• ATTACCO SFERICO PILOT D.3,80H.2 MM, CHIAVE ESAGONALE
• ATTACCO SFERICO PILOT D.3,80H.3 MM, CHIAVE ESAGONALE
• ATTACCO SFERICO PILOT D.3,80H.4 MM, CHIAVE ESAGONALE
• ATTACCO SFERICO PILOT D.4,70H.2 MM, CHIAVE ESAGONALE
• AVVITATORE PER TWL CON ATTACCO ESAGONALE
• AVVITATORE PER TWL CON ATTACCO ESAGONALE